713-518-9660

Tag Archives: Reduced Pressure Assembly

Expensive Mistake

I had a call today from a customer that asked us to come out and Fix their Backflow Preventer. I asked them to send me a couple of pictures. I was all to happy to help. I can’t fix this. The installation is incorrect. The Wilkins 375 3″ is not approved for installation vertical flow […]

Continue Reading...

Unprotected Bypass

The unprotected bypass is unacceptable. To correct the direct cross connection, the bypass needs to be cut out and capped or another RP needs to be installed. I tested the RP, but on the report noted and documented that there is an unprotected bypass that needs to be corrected. It is very important to document […]

Continue Reading...

RP Install Wall of Shame!

This is installed too close to the wall and Testing cannot happen. This is on the Wall of Shame.

Continue Reading...

Work can be fun!

This project was a lot of fun. It was time in the fresh air, on a 4 wheeler ATV, and a paycheck too.

Continue Reading...

Too Close for Comfort!

This turned out to be a pretty big pain to test both assemblies.  The first issue, is with out Swivel Adapters for the test cocks, testing the assembly is not possible.  If you are a backflow tester, you need Swivel adapters for the test cocks.  The second issue, the test cock adapters from the first […]

Continue Reading...